Skills Of Structured Cabling Part 2

Use more forward-looking integrated wiring supplies

With the rapid development of network equipment, you should try to be as open as possible when choosing solutions. Use Category 5 or more horizontally to ensure that data and voice can be interchanged. Use optical fibers to increase logarithmic cables vertically. For some buildings with many points , should use optical fiber for data backup instead of cable.

Adding fiber optic products can be considered

As the prices of optical fiber products continue to drop, the large bay cabling should consider distributing more light points, which is beneficial to network construction.

Special attention should be paid to laying optical cables

When laying the DG pipe, a larger diameter should be used, and a margin should be reserved. When laying the optical cable, pay special attention to the turning radius. If the turning radius is too small, the link will be seriously lost. Carefully check each optical cable, especially the panel box of the optical contact. Some panel boxes are not deep enough. It is good when the box is installed, but the test is not good after it is installed. The reason is that the corner radius of the optical cable is too small after being installed, causing serious loss.

Upgrading traditional practices

With the price reduction of optical fusion splicing equipment, where conditions permit, we can consider abandoning the traditional production methods of ST and SC heads, and adopting the method of splicing pigtails and optical fibers can better ensure the quality of the optical path.